Enter your search text in the box above

Select a result to preview

Lesson 2.1: IP Trigger Basics

Lesson 2.1: IP Trigger Basics

⚡ The Logic (Mermaid)

graph LR
    CAM[IP Camera or VMS] -- Ethernet (ONVIF/HTTP) --> CTRL[Inner Range Integriti]
    CAM -- Physical I/O Wire --> IN[Auxiliary Input]
    CTRL -- Logic --> EV[Video Event / Alarm]
Hardware Landmark: IP Camera Alarm I/O

!400
Above: The rear of a professional IP camera showing the RJ45 network port and the green pluggable terminal block for Alarm Inputs/Outputs.

🧠 The Concept

Integrating CCTV with Inner Range allows you to trigger recording or pop-up video when a door is forced or held open. This is done either via Software (Network/ONVIF) or Physical Wiring where the camera's relay connects directly to an Inner Range input.

🛠️ Hands-on Steps

  1. Network Sync: Ensure the camera and the controller are on the same subnet.
  2. Physical Link: Wire the COM and NO terminals of the Camera's alarm output to a Spare Input on your Access Module.
  3. Software Trigger: In the Inception/Integriti web interface, create a "Video Trigger" that listens for the input state change.
  4. Testing: Manually trigger the camera's relay and verify the event appears in the system log.

⬅️ Previous Module | Next Lesson: Milestone Integration ➡️